Home > Hard Drive > Can't Boot From Sata Hard Drive Anymore

Can't Boot From Sata Hard Drive Anymore

Contents

But it is the Samsung with my games on that I'm having the most trouble with, it has shown in my BIOS but usually does not and then in my Computer/Device It worked, I got into windows. Hope to get an answer here. So now I don't know if the HD is bad or if the failed Ghost Image Restore cause some kind of glitch. Check This Out

You can check the BIOS settings and modify them for SATA to read them as IDE and not as RAID, but somehow I don't think that could affect your system, because i did already change the sata cable, used mine from my pc, no change tho. Since the computer cannot boot into Windows XP, the "Device Manager" cannot be accessed and used to install the SATA HDD driver. IDE or SATA? http://www.tomsguide.com/answers/id-1850390/bios-boot-hdd.html

Hard Drive Detected In Bios But Won't Boot

win 7 ultimate (32 bit) Benchmark Scores: 6543 3d mark05 ye ye not good but look at the processor /uknown as still not benched going back to the original post, can't I always tell users that one of the first things they should do when they get a new computer or install a fresh operating system is create a restore disk and The thing is when I go into my setup there is no option to fix that.

I would highly recommend that at this point, you copy your data over to another drive — just in case. The hard drive that has a bootable partition must be made to be first in the list, Save bios settings.- or - in some bioses, the Boot Order or similar list Usually this results in a short freeze after which everything works fine again. Hard Drive Not Showing Up In Boot Priority A mechanical problem with the hard drive usually manifests itself in grinding or squeaking noises, random crashes or data loss.

Could it be possible that after all this time, the computer is unhappy with the SATA Raid Driver's? Computer Won't Boot With Second Hard Drive When I try to boot it starts to post, I select the boot from CD option and the monitor stays blank. Thanks. see it here Thanks so much!

If the drive can be seen but not accessed, most likely the partition table has gone corrupt. Bios Detects Hdd But Wont Boot I tried different connecters and different sata ports in my MB. Do you have any suggestions I could fix this permanently thanks Jon. March 15, 2012 Dave I would replace the battery anyway if the computer is more than three years old-they're only a couple of bucks.

Computer Won't Boot With Second Hard Drive

I have bought a recovery CD but this does not work either. i don't see anything in the cmos about emulation. Hard Drive Detected In Bios But Won't Boot Unfortunately, hard drives are a commodity and need to be treated as such. Pc Won't Boot From Hard Drive If IDE do you have the jumpers set right for Master/slave/single?

If you borrow a floppy drive and a floppy data cable from another computer, you can install the SATA drive controller drivers from a prepared floppy disk after pressing F6 near http://liveterrain.com/hard-drive/computer-won-t-read-hard-drive-on-boot-up.php Now, every operating system approaches the restore disk differently. I tried booting from the CD again to use another older Ghost10 image but now I can no longer boot from either DVD drive. It seems like the controllers on the motherboard have failed if the hard drive is working on other computers. Computer Won't Boot From Hard Drive

The jumper pins on the back of the drive should be set to Master for the Primary and Slave for the Secondary. Jon. But its not showing in the bios. http://liveterrain.com/hard-drive/hard-drive-upgrade-win-xp-doesn-t-come-up-anymore.php If there is data on the drive you need, you can try hooking it up to an external case or installing it as a second drive in a working computer and

New Hard Drive Does Not Show Up In BIOS The very first thing to check are the jumpers if you have an IDE drive. Bios Can't See Hard Drive The latter can often be found splashed across the screen when you first boot the PC. However, I can take my hard drive out and put it in a caddy, attach it to my other computer via USA and all the files are there and readable.

But if it doesn't auto-detect the drive, it probably will not detect it manually, either.

i tried in another PC, had swapped every cable and tried in several OS..but result it same… is there anything with the harddisk logic card or its firmware?? All rights reserved. Good luck! How To Add Boot Option In Bios Asus I used a Sata connection to my 2 y/o MB and I had to get a converter for the 4pin to sata power.

I have newly acquired an e-machines E3031 (ms-2707 ver.2 mother board) hardly used from new. The hard drive that has a bootable partition must be made to be first in the list, Save bios settings.- or - you must change which data header the drive that Maybe try a BIOS update for the mobo…there's probably a new BIOS since the computer is so old. http://liveterrain.com/hard-drive/cannot-boot-from-hard-drive-at-all.php Gigabyte.

During POST it shows the BIOS as being the latest one (7043, v2.0, released 041105). Do you have any other boot discs you can try, like Windows installation CD? It booted fine but the Restore failed so C is no longer functioning. solved SSD won't detect in bios (new system no windows) solved Bios won't detect 120gb mSata SSD but detects a 32GB one solved Bios or boot menu won't recognize my harddrive

It's a physical problem-maybe a bearing has seized or read/write head fell off. March 21, 2012 Jon Hi, Dave, it is a spare I got from a friend and he used it for Linux only and gave it to me when he upgraded to